Multilayer Lamination
Delivering Superior IML Performance
From adhesive coating to co-extrusion, Motek masters the core lamination technologies for IML labels, ensuring excellent performance in printing, molding, and recycling.
From Principles to Selection: A Deep Dive into Multi-layer Lamination Processes for In-Mold Labeling
IML lamination includes four types: co-extrusion (mainstream, MDO solves stiffness vs. conformability), dry lamination, extrusion lamination, and solvent-free (eco-friendly). Co-extrusion leads; solvent-free gains in mid-high end. Understanding differences guides optimal choice.
Best for: Adhesive layer for IML, high efficiency, no VOC
Embossing (Mesh Pattern)
Creates venting channels Prevents bubbles on large labels Adjustable depth 10-30μm
Best for: For large-area IML labels to avoid air traps
Co-extrusion
Multi-layer resin one-pass No solvents, strong interlayer adhesion Integrates barrier (EVOH) or white layer
Best for: High-performance base films, stable & green
Solvent-based Dry Lamination
High initial tack Suitable for various film combinations Requires drying oven
Best for: Multilayer structures demanding extreme bond strength
Solvent-Free Lamination
Zero VOC, energy saving 2-component adhesive mixed inline Clear & bubble-free after curing
Best for: Food-contact & eco-sensitive IML
Extrusion Lamination
Extruded resin layer directly Wide thickness range for adhesive Coating & bonding in one step
Best for: Labels needing thick adhesive or special resin layer
Typical Multilayer Lamination Process Flow for IML
The multilayer lamination process for in‑mold labels typically starts with substrate preparation: the printed top film and the middle layer film are unwound separately, then subjected to corona treatment to improve adhesion before entering the coating or extrusion unit. Depending on the chosen process, this may involve hot‑melt adhesive coating, solvent‑free adhesive coating, or molten resin extrusion. For large-area labels, a venting pattern is embossed onto the adhesive layer surface using an anilox roller. Subsequently, the layers are bonded together under precise pressure and temperature in a laminating nip, forming a complete three‑layer structure.
The laminated web is then cooled on chill rolls or sent into a curing chamber for full cross‑linking, and finally rewound into master rolls or directly fed into a die‑cutting unit to produce single labels. Throughout the process, coating weight, lamination pressure, and interlayer adhesion are monitored online to ensure consistency and reliability for every batch of labels.
Substrate Prep
Unwind printed top film / middle layer
Coating/Extrusion
Hot-melt, extrusion or adhesive coating
Embossing
Apply venting pattern for large labels
Lamination Nip
Press multiple layers together
Cooling/Curing
Cooling or curing chamber
Rewind/Die-cut
Rewind roll or direct die-cutting
Motek integrates the above processes to provide a “film in, finished label out” integrated lamination solution.
Quality Control & Motek Advantages
The quality of IML lamination relies on three key factors: coating uniformity (adhesive layer thickness deviation ≤±5%), embossing precision (venting depth/screen matched to label area), and interlayer adhesion (peel strength exceeding container tear strength). Motek delivers closed-loop coating control, laser-engraved anilox rollers, inline peel testing, and customized surface treatments for co-extrusion, dry, and solvent-free processes – ensuring every batch performs consistently in printing, die-cutting, and in-mold molding.
One-shot molding, never peels off – In-Mold Labeling Technology
In-Mold Labeling (IML) fuses a pre-printed label with a plastic container during molding – a single step that eliminates post‑labeling. The heat activates an adhesive, creating a permanent, molecular bond. With same‑material label and container (PP/PP or PE/PE), the whole package is fully recyclable. Durable, efficient, and sustainable.