Location:
In-Mold Labeling Technology
In-Mold Labeling
In-Mold Labeling Mold & Decorate in One Step

IML places a pre-printed label inside the mold, fusing it with the plastic container during molding. Eliminates post-labeling, enhances durability and recyclability – the efficient green solution for modern packaging.


What is In-Mold Labeling?
In-Mold Labeling (IML) is a process that fuses a pre-printed label with a plastic container during injection or blow molding. The label is placed inside the mold before the plastic is injected or blown – the heat melts a special adhesive on the label’s back, bonding it permanently to the container as it forms.
The result is a single, inseparable part: decoration and container become one. IML eliminates post-mold labeling, offers superior durability (water, oil, scratch, temperature resistance), and enables full recyclability when label and container use the same material (e.g., PP/PP). It’s a clean, efficient, and sustainable packaging solution.
Label placement → mold closing → injection/blow → cooling → finished label fused in one cycle.
Simultaneous Molding
Label placement → mold closing → injection/blow → cooling → finished label fused in one cycle.
Pre-coated adhesive melts at mold temperature, forming a permanent bond with the container wall.
Heat-Seal Adhesion
Pre-coated adhesive melts at mold temperature, forming a permanent bond with the container wall.
PP/PE label and container share identical material – no separation needed for direct shredding and re-pelletizing.
Same-Material Recyclable
PP/PE label and container share identical material – no separation needed for direct shredding and re-pelletizing.
IML Core Advantages: Efficiency · Durability · Aesthetics · Sustainability
In-Mold Labeling (IML) integrates the labeling step directly into the container molding process, eliminating the need for separate equipment, labor, and energy required by traditional post‑mold labeling. This enables single‑line continuous production, increasing overall efficiency by 20‑30%. At the same time, the label and container achieve molecular‑level fusion through heat‑seal adhesion, offering outstanding durability – water resistance, oil resistance, scratch resistance, and high/low temperature tolerance. In demanding environments such as personal care, food, and chemical packaging, the graphics remain intact with zero risk of label peeling.
Moreover, IML enables 360° seamless decoration. Combined with mold surface textures, it can achieve glossy, matte, or tactile finishes, significantly enhancing packaging appeal. For environmental sustainability, the same‑material PP/PE design means the label and container require no separation – the entire package can be directly shredded and re‑pelletized, fully complying with EU PPWR and global circular economy directives. Motek offers a full range of recyclability‑certified materials and end‑to‑end technical solutions, helping brands achieve the optimal balance between quality, efficiency, and green sustainability.
Eliminates post-mold labeling, reduces labor and floor space.
Higher Efficiency
Eliminates post-mold labeling, reduces labor and floor space.
Waterproof, oil-resistant, scratch-resistant, withstands extreme temperatures.
Excellent Durability
Waterproof, oil-resistant, scratch-resistant, withstands extreme temperatures.
No label edge, combined with mold texture for glossy/matte/tactile finishes.
360° Premium Look
No label edge, combined with mold texture for glossy/matte/tactile finishes.
Same-material design meets EU PPWR and global recycling standards – fully certified.
Green Certified
Same-material design meets EU PPWR and global recycling standards – fully certified.
Four mechanisms, one goal – labels that never leave the container.
The reason why in‑mold labeling achieves “molding and labeling in one step” lies in the precise synergy of four core mechanisms. Simultaneous molding integrates label fusion and container formation into the same mold cycle, eliminating traditional post‑mold labeling and achieving process integration. Heat‑seal adhesion allows the pre‑coated adhesive on the back of the label to melt at the mold’s high temperature, bonding firmly to the container wall without any extra glue. These two mechanisms ensure production efficiency and bonding strength.
At the same time, same‑material matching requires the label substrate and the container to be made of the same type of plastic (e.g., PP with PP, PE with PE). Under high temperature, the molecular chains interdiffuse, forming an inseparable fused interface while also enabling easy overall recycling. Precise positioning holds the label accurately against the cavity wall using vacuum (for blow molding) or electrostatic (for injection molding) adsorption, preventing any displacement during molten plastic filling. These four mechanisms support each other and together form the technical foundation of IML.
Label fusion and container formation in same mold cycle
Simultaneous: Molding
Label fusion and container formation in same mold cycle
Adhesive melts – no extra glue
Heat-Seal: Adhesion
Adhesive melts – no extra glue
Molecular interdiffusion between label and container
Same-Material: Matching
Molecular interdiffusion between label and container
Vacuum/electrostatic hold label during high-speed filling
Precise: Positioning
Vacuum/electrostatic hold label during high-speed filling
One-shot molding, never peels off – In-Mold Labeling Technology
In-Mold Labeling (IML) fuses a pre-printed label with a plastic container during molding – a single step that eliminates post‑labeling. The heat activates an adhesive, creating a permanent, molecular bond. With same‑material label and container (PP/PP or PE/PE), the whole package is fully recyclable. Durable, efficient, and sustainable.
Functional Coatings & Surface Treatments
Antistatic for reliable picking; slip to prevent double feeding; UV/scratch-resistant overcoat; primer for PP/PE adhesion; EVOH barrier for extended shelf life.
Same-Material Recycling Design
PP/PE labels and containers – no separation, direct shredding and re-pelletizing. Compliant with EU PPWR and circular economy. Motek offers fully recyclable certified materials.
Three Functional Layers – Short Introduction
An IML label is not a single film but a precision composite of three distinct layers. The printing layer carries graphics and withstands heat and abrasion. The middle layer provides stiffness and dimensional stability, preventing deformation during molding. The adhesive layer melts at in‑mold temperatures to fuse permanently with the container, with embossed patterns for venting on large labels. Together, these three layers determine the label’s molding accuracy, durability, and recyclability – structure defines performance.
Printing Layer (Top)
Carries ink, withstands hot mold wall – BOPP/PE, transparent or white
Printing Layer (Top)
Printing Layer (Top)
Carries ink, withstands hot mold wall – BOPP/PE, transparent or white
Provides stiffness & dimensional stability, prevents deformation – can be white or barrier
Middle Layer (Support)
Provides stiffness & dimensional stability, prevents deformation – can be white or barrier
Hot-melt coating, embossed/plain pattern, fuses permanently with container
Adhesive Layer (Bottom)
Hot-melt coating, embossed/plain pattern, fuses permanently with container
Supported Printing Technologies – Short Introduction
IML supports a range of printing technologies to meet different quality, volume, and budget needs. From gravure (ultra‑long runs, highest saturation) and flexo (inline, eco‑friendly) to offset (photographic quality), digital (variable data, no plates), and screen (special effects, braille), Motek provides films and adhesives tailored to each process. The right printing method combined with Motek materials ensures perfect fusion and vivid, durable decoration.
Thick ink, high saturation, lowest long-run cost – ideal for ≥5M pcs/year
Gravure
Thick ink, high saturation, lowest long-run cost – ideal for ≥5M pcs/year
Inline integrated, eco-friendly UV/water inks – efficient for medium-large runs
Flexo
Inline integrated, eco-friendly UV/water inks – efficient for medium-large runs
Top image quality, flexible short runs – perfect for photographic designs
Offset
Top image quality, flexible short runs – perfect for photographic designs
No plates, variable data, on-demand zero inventory
Digital
No plates, variable data, on-demand zero inventory
Special effects, braille, metallic, glow – local highlights
Screen
Special effects, braille, metallic, glow – local highlights
Please fill in the content on the right, we will contact you within 24 hours
Upgrade Your Packaging with IML
End-to-end support from material selection, printing adaptation to mold optimization.
  • Name*

  • Telephone*

  • Region*

  • Please fill in your request*

电话咨询:020-000000
QQ咨询:177488228
微信客服
扫码咨询