Location:
IML In‑Mold Label Yogurt Cups Seamless One‑Piece Molding – Label Permanently Fused into Cup – No Adhesive, No Bubbles
IML In‑Mold Label Yogurt Cups Seamless One‑Piece Molding – Label Permanently Fused into Cup – No Adhesive, No Bubbles
IML In‑Mold Label Yogurt Cups Seamless One‑Piece Molding – Label Permanently Fused into Cup – No Adhesive, No Bubbles
Detail

Motek presents IML yogurt cups manufactured using advanced in‑mold labeling technology. The printed label is seamlessly fused with the cup wall during the injection molding process. No adhesive, no bubbles, no gaps – the label becomes part of the wall. Traditional issues such as edge curling, bubbling, and label detachment are completely eliminated. Suitable for all types of yogurt (ambient yogurt, chilled yogurt, Greek yogurt, kids’ yogurt), providing durable, clean, and premium packaging for your brand.


Key Product Advantages

▪ 1. Seamless One‑Piece Molding – Label & Cup Wall Without Interface

  • IML label molded together with molten PP inside the injection mold

  • Label edges fully encapsulated by plastic – no separation interface

  • Smooth, continuous surface – no tactile edge, visually seamless

▪ 2. Label Permanently Fused into Cup – Never Falls Off

  • No chemical adhesive – no aging or adhesive failure

  • Bond strength close to the material’s own strength

  • Withstands repeated washing, refrigeration, wiping – label stays attached

▪ 3. No Adhesive, No Bubbles – Eliminates Traditional Label Defects

  • No pressure‑sensitive adhesive – no migration or residue

  • Vacuum venting during molding – no trapped air

  • No bubbles, no white spots, no edge curling – perfect shelf image

▪ 4. Food‑Grade PP Material – Safe & Odorless

  • Virgin food‑grade polypropylene, certified to FDA and EU 10/2011

  • BPA‑free, phthalate‑free – direct contact with yogurt and dairy

  • Refrigeration‑resistant (-20°C), grease‑resistant – no odor absorption

▪ 5. Full‑Color High‑Definition Printing – Long‑Lasting Brand Visibility

  • Multi‑color IML printing – saturated colors, sharp details

  • Transparent PP protective layer over label – scratch‑resistant, washable

  • Print brand logos, nutrition facts, barcodes, promotional messages


Technical Specifications (Typical)

ParameterSpecification
Capacity range80 g – 500 g (common: 100g, 125g, 150g, 200g, 400g)
Cup shapeRound / Square / Oval / Custom (private mold available)
Cup materialFood‑grade polypropylene (PP)
Label materialSpecial PP film (same material)
Fusion methodInjection molded together – no adhesive, no interface
Bubble resistanceMold vacuum venting – zero bubbles in finished product
Edge propertyLabel edges fully encapsulated – no curling possible
Operating temperature-20°C ~ 60°C
Optional lidsPP flip lid, easy‑peel sealing film, aluminum foil lid
Minimum order quantity10,000 pcs (trial orders negotiable)

Motek IML Yogurt Cup vs. Traditional Adhesive Label Cup

FeatureTraditional Adhesive Label CupMotek Seamless IML Cup
Label edgesProne to curling (refrigeration, moisture)Seamless embedded – never curls
BubblesPossible during labelingZero bubbles (vacuum venting)
Label detachmentAdhesive ages – may fall offNever falls off (physical fusion)
Adhesive migrationPossible food safety riskNo adhesive – safer
WashabilityLabel can soak, liftWashable – remains intact
RecyclabilityNeed label separationSame material – direct recycle

Application Scenarios

➤ Chilled yogurt – Long‑term refrigeration – no curling, no bubbling
➤ Ambient yogurt – Extended shelf life – no fading, no detachment
➤ Greek yogurt – High‑viscosity filling – label withstands mechanical impact
➤ Kids’ yogurt – No label peeling risk – safe for children
➤ Premium dairy – Seamless high‑gloss finish – enhances brand value


Customization Services (Motek One‑Stop Support)

Customization itemOptions available
Cup shapeRound, square, oval; private mold available
Capacity80 g – 500 g – custom design
Label printing1–8 colors, CMYK + spot colors; full or partial circumference
Surface finishHigh gloss / Matt / Spot UV
Lid typePP flip lid, easy‑peel film, aluminum foil
Minimum order quantity10,000 pcs (trial from 3,000 pcs negotiable)

About Motek

Motek is a professional manufacturer of IML in‑mold label packaging, with over 12 years of injection molding and in‑mold labeling experience. We specialize in “seamless one‑piece” technology, equipped with vacuum venting mold systems to ensure zero bubbles and zero edge curling for every yogurt cup. Our factory is ISO 9001, BRC, and FSSC 22000 certified. We have supplied IML yogurt cups to numerous dairy brands worldwide, helping customers enhance shelf competitiveness.

Quality commitment: Every batch undergoes bubble inspection, edge curling inspection, and -20°C refrigeration adhesion testing. If any bubble or curling is found, full replacement or refund.


FAQ

Q: What does “seamless one‑piece molding” mean?
A: It means the label and cup wall are fully fused during injection molding – no adhesive layer, no air gap. You cannot feel the label edge by touch, and it looks like the graphic is printed directly on the cup.

Q: Why do IML yogurt cups have no bubbles?
A: Our molds are designed with vacuum venting systems. Air is evacuated from the cavity before injection, ensuring the molten plastic and label are tightly bonded with no trapped air.

Q: Will the label curl after refrigeration?
A: No. The label edges are encapsulated by the cup plastic, and the label and cup have the same coefficient of thermal expansion – no stress curling at low temperatures.

Q: Can you produce small‑size cups for kids’ yogurt?
A: Yes. Small capacities such as 80g and 100g can be custom molded. The IML label has no peeling risk, making it safer for children’s products.

Q: Can you accept an MOQ of 5,000 pieces?
A: Negotiable. For first‑time customers, we support trial runs of 5,000 pieces (unit price slightly higher).

Seamless one‑piece, yogurt looks better – Motek IML cups fuse packaging with your brand.

IML In‑Mold Label Yogurt Cups Seamless One‑Piece Molding – Label Permanently Fused into Cup – No Adhesive, No Bubbles

Facebook
X
LinkedIn
Pinterest
Whatsapp
Line
Tumblr
$1.00
Parameter
Process Type : In-Mold Labeling
Applicable Molding Process : Injection
Application Areas : Cabinet Furniture
Substrate Material : PVC BOPP、PE、PET、PP Paper
Label Thickness : Fully customized Typically 50–60 μm, range 15–110 μm
Size / Shape : Fully customized, die‑cut to customer’s drawing
Surface Finish : Glossy
Applicable Materials : PP, PC, ABS, PC+ABS, etc.
Adhesion Requirement : Must be compatible with container material → fuses perfectly
Printing Process : Gravure
Available Textures : Custom patterns
Up to 10 colours : Up to 10 colours
Colour Standard : Pantone / CMYK
Special Effects : Fully customized, Cold foil (gold/silver), colour‑shift, scented ink, spot varnish, etc.
Reservation Now
Email Us Now
电话咨询:020-000000
QQ咨询:177488228
微信客服
扫码咨询