
Motek presents scratch‑resistant IML butter containers. Building on standard IML technology, we add a transparent PP protective layer (30-50μm) over the printed label. The label graphics are fully encapsulated under this wear‑resistant surface. Whether from stacking friction during cold‑chain transport, repeated handling on store shelves, or daily cleaning by consumers, the label stays scratch‑free, non‑fading, and crystal clear. Ideal for butter, margarine, spreads, and all dairy packaging – especially in high‑frequency handling, wholesale distribution, and household reuse scenarios.
▪ 1. Protective Layer Over Label – Physical Scratch Barrier
30-50μm transparent PP protective layer over the IML printed layer
Protective layer molded simultaneously – no risk of delamination
Withstands friction from coins, fingernails, stacking edges – no damage to graphics
▪ 2. Remains Clear After Repeated Wiping – Resists Cleaners & Washing
Protective layer resistant to common detergents and alcohol wipes
Can be wiped repeatedly with damp cloth – no fading, no wear
Ideal for foodservice kitchens, household refrigerators – areas requiring frequent cleaning
▪ 3. Survives Stacking & Transport – Friction & Abrasion Resistant
When tubs stack, bottom edges do not scratch labels on tubs below
Vibrations during pallet transport do not affect print integrity
Damage rate far lower than ordinary adhesive labels
▪ 4. Food‑Grade PP Material – Safe & Reliable
Virgin food‑grade polypropylene, certified to FDA and EU 10/2011
Protective layer also PP – food contact safe
Refrigeration‑resistant (-20°C) – protective layer does not become brittle
▪ 5. Full‑Color High‑Definition Printing + Protective Layer = Long‑Lasting Beauty
Printed layer protected – colors remain saturated
Supports microtext, QR codes – fine details not destroyed by scratching
Customizable high‑gloss or matt protective layer finish
| Parameter | Specification |
|---|---|
| Capacity range | 50 ml – 500 ml (125g, 250g, 500g butter) |
| Container shape | Round / Square / Oval (customizable) |
| Container material | Food‑grade polypropylene (PP) |
| Label structure | Printed layer + transparent PP protective layer (30-50μm) |
| Protective layer hardness | ≥ HB (pencil hardness) |
| Scratch resistance test | 500g weight + steel wool rubbing x50 cycles – no visible damage to graphics |
| Wipe resistance test | Alcohol wet cloth x100 wipes – no fading |
| Operating temperature | -20°C ~ 60°C |
| Optional lids | PP flip lid, easy‑peel film, aluminum foil seal |
| Minimum order quantity | 10,000 pcs (trial orders negotiable) |
| Test | Ordinary Adhesive Label | Standard IML (no protective layer) | Motek Scratch‑Resistant IML (with layer) |
|---|---|---|---|
| Fingernail scratching | Leaves marks, damages print | Slight marks | No visible marks |
| Stacking friction | Edge curling, print wear | Fine scratches | No damage |
| Alcohol wipe | Ink may dissolve | Slight fading | No change |
| Steel wool x50 cycles | Heavy print damage | Obvious scratches | Only light marring |
✔ Three‑layer structure – PP base → printed ink → transparent protective layer – protective layer absorbs external friction
✔ Simultaneous molding – Protective layer fuses with label during injection – no delamination risk
✔ High‑hardness material – Modified wear‑resistant PP – hardness close to acrylic
✔ Optical clarity – High transparency of protective layer does not affect saturation or brightness of printed colors
➤ Butter wholesale & distribution – Pallet stacking, long‑haul transport – labels not scratched
➤ Foodservice kitchens – Daily multiple uses and wiping – label stays clear
➤ Household refrigerators – Repeated opening, water spot wiping – no worry about label damage
➤ Supermarket refrigerated cases – Consumer touching and handling – brand display unaffected
➤ Bakeries – Frequent use of large‑capacity butter tubs – label durable
| Customization item | Options available |
|---|---|
| Container shape | Round, square, oval; private mold available |
| Capacity | 50 ml – 500 ml – custom design |
| Label printing | 1–8 colors, CMYK + spot colors |
| Protective layer finish | High gloss / Matt (matt recommended for better scratch resistance) |
| Lid type | PP flip lid, easy‑peel film, aluminum foil |
| Minimum order quantity | 10,000 pcs (trial from 3,000 pcs negotiable) |
Motek is a professional manufacturer of scratch‑resistant IML packaging, with over 12 years of injection molding and in‑mold labeling experience. We have developed proprietary co‑extrusion technology for the protective layer, ensuring uniform thickness and strong adhesion. Our factory is ISO 9001, BRC, and FSSC 22000 certified. We have supplied scratch‑resistant IML containers to numerous butter and dairy brands globally, significantly reducing label damage during transport and use.
Scratch resistance commitment: Every batch undergoes steel wool friction testing (500g, 50 cycles) and alcohol wipe testing. If label damage exceeds standard, we offer full replacement or refund.
Q: Does the protective layer affect label clarity?
A: No. The protective layer is highly transparent PP with ≥92% light transmission and no haze. Printed colors appear almost identical to unprotected labels.
Q: Can the protective layer delaminate from the printed layer?
A: No. The protective layer and printed layer are fused together during injection molding – no adhesive, no interface – no delamination.
Q: How much more does scratch‑resistant IML cost compared to standard IML?
A: Per‑unit cost increases approximately 10-15%. Given reduced damage and extended packaging life, the overall value proposition is excellent.
Q: Can it be washed in a dishwasher?
A: The protective layer withstands 60°C water and mild detergents, but the high‑velocity water jets in dishwashers may cause physical impact – hand washing is recommended.
Q: Can you accept an MOQ of 5,000 pieces?
A: Negotiable. For first‑time customers, we support trial runs of 5,000 pieces (unit price slightly higher).