
Among the technical spectrum of in-mould labeling (IML) materials, polyethylene (PE) film excels in recycling compatibility, biaxially oriented polypropylene (BOPP) film in printability and stiffness, and PE+PP composite film in balancing these properties. However, when container shapes break the conventional mold – such as curved, twisted, or irregular bottles, or when labels must cover large curved surfaces – all the above materials face a common limitation: they cannot deform significantly with the bottle without wrinkling or edge lifting. To address this, a class of specialty films represented by Avery Dennison’s Primax® and FasClear® has emerged. These materials, produced through a unique Machine Direction Orientation (MDO) process, impart both rigid support and flexible deformability to the same film, making them currently the most capable IML solution for complex bottle geometries, large-area labels, and high-end personal care packaging.
1.1 Synthesis of PP and PE – Combining Toughness and Softness
Primax and FasClear are essentially blends of PP and PE – polyolefin multilayer composite films. The design philosophy integrates the toughness of PP (rigidity, stiffness, dimensional stability) with the softness of PE (flexibility, deformability, crush resistance) through a special process, creating a new film that possesses the advantages of both materials.
Typically, Primax and FasClear have a three-layer structure:
Printing layer (top): Provides excellent printability; the surface is smooth and flat after corona treatment, suitable for various printing methods.
Core layer (middle): Determines the label’s stiffness, transparency, and dimensional stability.
Adhesive layer (bottom): Melts under in‑mould heat, ensuring good fusion between the label and the container.
1.2 Machine Direction Orientation (MDO) – Building a Rigid Axis and a Flexible Axis
The core technical secret of Primax and FasClear lies in their Machine Direction Orientation (MDO) process. The manufacturing steps are:
PP and PE resin pellets are melted in extruders and fed into a casting unit.
The molten polymers are combined and extruded through a slot die.
The film is cooled and thinned on chill rolls.
The film is stretched and set in the machine direction (MD) through an orientation unit, creating a film that is rigid and supportive in the MD but flexible and deformable in the cross direction (CD) – this is the key step that achieves the “stiff yet conformable” character.
Corona treatment increases the surface tension (typically >40 dynes/cm).
The film is wound into rolls ready for printing.
After MDO, Primax and FasClear are “straightened” and set in the MD, giving the film sufficient rigidity and stiffness for accurate registration and smooth feeding in high‑speed automatic labeling. Meanwhile, the CD retains the softness of PE, allowing the label to conform flexibly to the container shape without wrinkling.
1.3 Difference Between Primax and FasClear
The two products differ in visual appearance:
| Product | Appearance | Typical Use |
|---|---|---|
| Primax | Smooth, glossy/pearl white opaque film | White bottles or packaging requiring opacity |
| FasClear | Matte, translucent/frosted clear film | Clear bottles aiming for a “no‑label look” |
Additionally, FasClear eliminates colour difference between bottle and label, integrating the label into the bottle for excellent visual unity.
2.1 Stretchable and deformable – conforms to irregular bottles without wrinkling or edge lifting
This is the most outstanding feature of Primax and FasClear. Because the CD retains the softness of PE, the label deforms as the bottle deforms. When applied to curved, twisted, or irregular bottles, or over large areas, the material stretches and contracts sufficiently, maintaining tight contact with the bottle surface – no wrinkling or edge lifting.
This makes them especially suitable for:
Curved and twisted bottle shapes
Irregular containers
Squeezable, elastically deformable tubes or bottles
Large‑area “billboard” label designs
In contrast, conventional BOPP films, with their high stiffness and low extensibility, easily develop orange peel, bubbles, or edge lifting on complex bottle shapes – limitations overcome by Primax and FasClear.
2.2 Excellent printability for high‑quality colour graphics
After corona treatment, the surface of Primax and FasClear achieves a stable surface tension above 40 dynes/cm, providing good adhesion for various inks (UV, solvent‑based, water‑based). The smooth, flat surface enables high‑precision halftone printing, fine text, and high‑saturation colour reproduction.
Because the film surface does not absorb ink, the printed labels have bright colours and a strong three‑dimensional effect, significantly outperforming paper and ordinary synthetic paper. This is especially valuable for high‑end cosmetics, personal care, and premium packaging.
2.3 Stiff in the feeding direction – suitable for high‑speed automatic labeling
Thanks to MDO orientation in the MD, the film has sufficient stiffness in the feed direction. Die‑cut labels remain rigid in the feed direction, making them easy to dispense and suitable for high‑speed automatic labeling lines. The label does not droop due to softness, ensuring accurate placement, smooth feeding, higher productivity, and reduced downtime.
2.4 Outstanding durability and robustness
Next‑generation high‑performance Primax and FasClear have been significantly upgraded:
Topcoat applied: Improves scratch resistance by 37% over traditional FasClear – labels stay intact in demanding environments like kitchens, bathrooms, retail shelves, and warehouses.
Vibrant colours: The topcoat also allows use of high‑intensity inks and higher‑definition printing, delivering brighter colours and stronger brand recognition.
Squeezability: Labels applied to tubes or flexible bottles continuously withstand squeeze deformation without cracking or delamination – something BOPP labels cannot achieve.
2.5 Environmentally friendly and recyclable
Primax and FasClear are polyolefin materials (blends of PP and PE). They are compatible with mainstream plastic containers (HDPE, LDPE, PP). The label and bottle can be melted together and suitable for recycling.
Furthermore, next‑generation high‑performance products achieve material reduction: According to Avery Dennison’s Greenprint™ assessment, high‑performance Primax and FasClear reduce material usage by 12%, fossil fuel consumption by 14%, and solid waste by 19% compared to 3.0 Mil MDO materials – further improving environmental sustainability.
2.6 Wide applicability – compatible with multiple printing processes and container materials
Primax and FasClear support various printing methods: letterpress/flexography, screen printing, solvent‑based flexo, water‑based inks. UV inks are recommended for best results. Hot stamping is also fully feasible.
Recommended container materials: HDPE, MDPE, LDPE, and PP. Typical applications include shampoo bottles, condiment bottles, laundry detergent bottles, and other personal care and household products, as well as food, beverage, industrial, wine & spirits, and durable goods markets.
In addition, Primax and FasClear are available in roll‑fed and sheet‑fed formats to suit different production lines.
3.1 Surface tension must be controlled – corona decay is a factor
Primax and FasClear are corona‑treated at the factory, but corona effect decays over time. When surface tension drops below 40 dynes/cm, re‑corona treatment is required, otherwise ink adhesion may fail. A side effect of corona treatment is static electricity, which can make label release difficult during automatic labeling. Therefore, unnecessary corona treatment should be avoided and anti‑static measures taken.
3.2 Over‑varnishing is required after printing
Primax and FasClear must be over‑varnished after printing to protect the ink and make the label surface smooth. High‑quality, scratch‑resistant, non‑shrink over‑varnish is required, otherwise the label may curl after varnishing. Flat, smooth labels stack without blocking and separate easily.
3.3 Higher cost than conventional films
As proprietary products of Avery Dennison, Primax and FasClear are manufactured using a special MDO process, resulting in significantly higher production costs than PE or ordinary BOPP films. They are positioned for the high‑end packaging market. However, for brands pursuing complex bottle designs and premium visual effects, the unique value they provide justifies the cost premium.
3.4 Specific processing requirements
Web handling and tension control: Use 6‑inch (152 mm) cores. Larger cores reduce bending deformation near the core, minimising label distortion. The printing press should have automatic tension control to ensure accurate registration.
Die‑cutting requirements: Because there is no liner, IML die‑cutting differs from pressure‑sensitive label cutting. Hardened, dedicated die‑cutting tools must be used to ensure cutting precision and clean waste removal.
Primax and FasClear are aimed at the high‑end packaging market, especially in the following fields:
| Application Area | Typical Products | Reasons |
|---|---|---|
| Personal care / Cosmetics | Mascara tubes, eyebrow gel tubes, concealer tubes, cream tubes, shampoo bottles | Complex shapes + fine printing + squeezable + label deforms without wrinkling |
| Household / Home care | Laundry detergent bottles, body wash bottles, dishwashing liquid bottles | Large curved surfaces + vibrant print + water/chemical resistance |
| Food / Condiments | Soy sauce bottles, salad dressing bottles, sauce tubes | Squeezable + conforms to irregular bottles + high shelf appeal |
| Beverages / Wine & spirits | Beer bottle labels, beverage bottle labels | Conforms perfectly to curved bottles + vivid colours + durable in ice water/refrigeration |
| Industrial / Garden | Durable goods bottle labels, tool bottle labels | Large‑area coverage + high durability + scratch resistant |
| Pharmaceuticals / Nutraceuticals | Ointment tubes, supplement bottles | Clear, readable labels + withstands bending without deformation |
It is worth emphasising that specialty films (Primax, FasClear) are currently the most capable IML material solution for complex bottle shapes, large‑area labels, and high‑end personal care packaging among similar products.
5.1 From Primax/FasClear to high‑performance versions
Traditional Primax/FasClear have been on the market for decades. Avery Dennison has launched next‑generation high‑performance Primax® and FasClear®. Key improvements include:
Topcoated surface: Significantly improved scratch resistance (37% better than previous generation);
ClearCut™ adhesive technology: Reduces adhesive build‑up on printing and labeling equipment, reducing equipment downtime by up to 50%;
Fully conformable: Optimised for complex bottle shapes, irregular containers, and challenging label designs;
Wider operating window: Accommodates a broader range of bottle shapes compared to conventional BOPP;
Higher productivity: Printing speeds up to 400 feet/minute or more, increasing production efficiency by 30%.
5.2 Evolution toward multi‑functionality and lightweighting
Material reduction: Next‑generation products achieve 12% material reduction, 14% less fossil fuel consumption, and 19% less solid waste without sacrificing performance – promoting low‑carbon packaging.
Functional surface coatings: Additional coatings such as antimicrobial, UV‑blocking, or high‑barrier coatings can be applied, expanding use in special environments (e.g., medical packaging, outdoor storage tanks).
All‑PP/all‑PE mono‑material trend: With the circular economy gaining momentum, mono‑material packaging is increasingly valued. As blends of PP and PE, Primax and FasClear offer brands a compromise solution that meets both complex bottle shape requirements and recyclability.
High‑performance MDO IML films represented by Primax and FasClear achieve a “stiff yet conformable” character through ingenious MDO technology – rigid and supportive in the machine direction, flexible and deformable in the cross direction. They satisfy the stiffness demands of high‑speed automatic labeling while perfectly conforming to curved, twisted, irregular bottles without wrinkling or edge lifting. In addition, they offer excellent printability, topcoat‑enhanced scratch resistance, and environmental recyclability.
Although these materials cost more than conventional PE or BOPP films, their unique performance advantages make them irreplaceable in high‑end personal care, cosmetics, household, food & beverage, and industrial durable goods applications. In particular, next‑generation high‑performance Primax and FasClear, with topcoat technology, ClearCut adhesives, and material reduction innovations, further expand the creative possibilities for label designers and brand owners, providing the optimal IML material solution for complex bottle shapes and billboard‑style large‑area labels. For premium applications that demand extreme packaging aesthetics, complex bottle designs, and brand differentiation, specialty films are undoubtedly one of the most noteworthy technology directions in the current IML materials market.