
In-mould labeling (IML) technology embeds a pre-printed label into a plastic container during the forming process, fusing the label with the container surface. Among various film materials, polypropylene (PP) and its biaxially oriented version – BOPP – have become one of the most widely used and technically mature material systems in IML, thanks to their excellent printability, high stiffness, and good heat resistance. Compared to polyethylene (PE) film, PP/BOPP offers clear advantages in print quality and processing efficiency, but also has inherent limitations such as shrinkage mismatch with PE containers.
Polypropylene (PP) film usually refers to unoriented cast polypropylene (CPP) or low-orientation polypropylene, which has a certain degree of flexibility and heat sealability. However, in IML, biaxially oriented polypropylene (BOPP) is the dominant choice.
BOPP is produced by stretching PP film in both the machine and transverse directions. This biaxial orientation aligns the polymer chains, imparting the following properties:
Very high tensile strength and stiffness;
Excellent optical properties (high transparency, high gloss);
Good printability (smooth surface, good ink adhesion);
Outstanding heat resistance (melting point approx. 160–170°C, suitable for in-mould temperatures).
In the three-layer structure of an IML label, BOPP is most commonly used as the printing surface layer, and in some products also as the support layer. Its stiffness ensures that the label remains flat and does not curl during high-speed printing and automatic labeling.
2.1 Excellent printability for superior graphics
After corona treatment, the surface tension of BOPP film can reach 40–42 dynes/cm, allowing strong adhesion with various UV inks and solvent-based inks. Its smooth, high-gloss surface enables high-precision halftone printing and vivid colour reproduction, meeting brand owners’ demands for premium packaging. Gradients, fine text, and complex barcodes are all clearly rendered on BOPP. Compared to PE film, BOPP provides stable print quality without requiring special formulations, which is why it is widely used in high-end daily chemical and food labels.
2.2 High stiffness – efficient processing and labeling
The high stiffness of BOPP makes it perform well in printing, die-cutting, and slitting:
Minimal deformation on high-speed rotary presses, ensuring accurate registration;
Labels maintain their shape after die-cutting, with no shrinkage or curling;
In automatic labeling systems, even with a longer pre-feed length, the label does not droop, resulting in accurate placement and smooth feeding.
These characteristics make BOPP particularly suitable for high-speed automatic IML production lines, significantly reducing downtime and waste.
2.3 Good heat resistance for the in-mould environment
During blow or injection moulding, the molten plastic temperature is typically 180–230°C. Although the label does not directly contact the melt, the interior of the mould is hot. BOPP has a melting point (approx. 160–170°C) higher than that of PE (approx. 120–130°C), allowing it to better withstand thermal stress during moulding without thermal deformation or melting. This provides a wider processing window.
2.4 Excellent optical properties – enhances packaging appearance
BOPP film offers high transparency and high gloss. When used as a clear IML label (unprinted or partially printed), it achieves a “no-label look” – the label blends seamlessly with the container, making the contents clearly visible. This is highly valuable for premium water bottles, cosmetic packaging, and similar applications.
2.5 Moderate cost with mature supply
BOPP film has a mature manufacturing process, widely available polypropylene raw materials, and relatively stable prices. In high-volume production, the overall cost of BOPP IML labels is lower than that of specialty films (e.g., Primax, FasClear) and higher than PE, but far lower than paper when performance is considered. Thus, BOPP strikes a good balance between performance and cost.
3.1 Shrinkage mismatch with PE containers – “orange peel effect”
This is the most prominent issue when applying BOPP to IML. PE (the most common container material) typically has a shrinkage rate of about 1.5–2.5%, while BOPP has a shrinkage rate of only 0.5–1.0% (even lower in some directions). During cooling in the mould, the PE container shrinks significantly more than the BOPP label. Because the label is fused to the container, this differential shrinkage creates fine, irregular wrinkles on the label surface, resembling orange peel – hence the “orange peel effect.”
This effect severely degrades packaging appearance, especially on large flat label areas. Therefore, BOPP is not recommended for full-surface IML directly on pure PE containers. If it must be used, special processes or lamination with other materials are required to reduce shrinkage differences.
3.2 Incompatible for homogeneous recycling with PE containers
BOPP labels and PE containers are made of different materials (polypropylene vs. polyethylene). Although both are polyolefins and could theoretically be recycled together, in actual recycling streams PP and PE have similar densities (approx. 0.90–0.91 g/cm³) and are difficult to separate by flotation. Mixed recycling leads to degraded properties (toughness, transparency) of the recyclate. Therefore, PE containers with BOPP labels are generally not considered “fully recyclable by design” – the label must be manually or mechanically separated, adding cost.
3.3 Poor low-temperature toughness
The biaxial orientation process makes BOPP molecular chains highly oriented, causing the film to become brittle at low temperatures (e.g., below 0°C) with reduced impact resistance. In cold-climate storage or cold‑chain packaging, BOPP IML labels may crack or break due to container deformation.
3.4 Difficulty conforming to complex bottle shapes
The high stiffness of BOPP also means low extensibility. When the container has a complex shape (e.g., curved, concave, or twisted), BOPP labels cannot stretch and conform like PE or specialty films, easily leading to edge lifting or bubbles on curved surfaces. Therefore, BOPP is mainly suitable for regularly shaped containers (cylinders, boxes, flat pails).
Despite the limitations above, BOPP IML labels dominate the following areas:
| Application Area | Typical Products | Reasons |
|---|---|---|
| Daily chemicals | Laundry detergent bottles (HDPE), dishwashing liquid bottles | Excellent print quality, high stiffness, chemical resistance |
| Food packaging | Ice cream tubs, butter boxes, yogurt cups (PP containers) | Food contact compliant, acceptable low-temperature performance |
| Chemical products | Engine oil pails (HDPE), paint pails | Oil and solvent resistance, abrasion resistance |
| Pharmaceuticals | Medicine bottles, nutraceutical containers | Dimensional stability, clear printing of traceable codes |
Important note: When the container itself is made of PP, BOPP is the best choice. PP containers and BOPP labels have similar shrinkage rates (both approximately 0.8–1.2%), eliminating the orange peel effect and enabling homogeneous recycling – an ideal “all-PP packaging solution.” For example, many injection-moulded PP yogurt cups and butter boxes use BOPP IML labels.
To overcome the incompatibility between BOPP and PE containers, the industry has developed several solutions:
PE+PP composite film: A PE functional layer is co-extruded onto the BOPP layer, forming a two- or multi-layer structure. This composite film combines the printability of BOPP with the compatibility of PE, providing a smooth surface when applied to PE containers and effectively suppressing the orange peel effect. This is now one of the mainstream solutions for IML on PE containers.
Low-shrinkage BOPP: By adjusting the stretching process and formulation, modified BOPP films with shrinkage rates close to PE (1.5–2.0%) are being developed. These products are gradually entering the market but remain costly.
Post-printing functional coating: A primer layer that can fuse with PE is coated on the back of the printed BOPP surface to improve bonding.
Driven by environmental packaging and the circular economy, mono-material packaging (all-PP or all-PE) is gaining importance. For the PP container market, BOPP IML labels will continue to be irreplaceable. For the PE container market, BOPP is gradually being replaced by PE film or PE+PP composite film, but still retains a place where high-end, high-speed, high-precision printing is required.
Polypropylene (PP) / biaxially oriented polypropylene (BOPP) film plays a pivotal role in in-mould labeling due to its excellent printability, high stiffness, good heat resistance, and moderate cost. It is best suited for PP containers, where it delivers high-quality printing and stable processing while enabling homogeneous recycling. When used on PE containers, the orange peel effect and recycling compatibility issues must be addressed, and PE+PP composite film can be considered as an alternative. As materials science advances, BOPP and its modified products will continue to play an important role in the IML market, especially in packaging scenarios that demand superior print quality.