Material Selection for Cold Drink Cups – How Does PP Material "Protect" IML Cold Drink Cups?
For cold drink cups using In-Mold Labeling (IML) technology, choosing the right polypropylene (PP) material is the critical first step in ensuring the cup combines performance, aesthetics, and safety. Selecting the right material allows IML's process advantages to be fully realized.
Different types of PP materials have different performance priorities:
- General-purpose PP: Cost-effective and meets basic requirements. Suitable for pure cold drink scenarios, such as juice, iced water, etc.
- High-heat-resistant PP: Designed for hot beverage applications, with a heat deflection temperature of 135-140℃, capable of safely holding hot coffee, hot tea, and more.
- IML thin-wall specialized PP: Optimized for high-speed injection molding and the IML process, excelling in flowability, impact resistance, transparency, and dimensional stability.
1. Core Differences: General-Purpose PP vs. High-Heat-Resistant PP – How to Choose?

The core difference between these two PPs lies in their long-term heat resistance, typically measured by Heat Deflection Temperature (HDT).
- General-purpose PP: HDT typically ranges from 100-130℃. For pure cold drinks (such as fruit tea, iced coffee), this heat resistance is sufficient. It can also handle occasional warm beverages.
- High-heat-resistant PP: Through special molecular structure design, HDT can be increased to 135-140℃. If the cold drink cup also needs to handle hot beverages – for example, as a hot milk tea cup – this type of material is required.
2. Born for IML: Advantages of Thin-Wall Specialized PP Materials
Beyond heat resistance, PP materials specifically designed for IML thin-wall packaging (such as Borouge RJ768MO) excel in the following key performance areas:
- Excellent impact toughness: Even under low-temperature refrigerated conditions, it offers outstanding drop impact resistance, effectively reducing breakage during transport and use.
- Superior transparency and gloss: Enhances the cup's appearance, making contents clearly visible and boosting shelf appeal.
- High flowability and fast crystallization: Suitable for high-speed injection molding, reducing production cycles and energy consumption.
- Low warpage and high dimensional stability: Ensures smooth label application, precise cup dimensions, and consistent appearance.
- Excellent sensory properties: Odorless and compliant with food contact safety standards, ensuring safe use.
Taking Borouge RJ768MO as an example, its key physical properties are as follows:
| Performance Indicator | Typical Value | Description |
|---|
| Melt Flow Rate (MFR) | 70 g/10min | High flowability, suitable for thin-wall, high-speed injection molding |
| Tensile Modulus | 1200 MPa | Good rigidity; the cup is resistant to deformation |
| Notched Impact Strength | 5.0 kJ/m² | Strong impact resistance, especially suitable for low-temperature environments |
| Heat Deflection Temperature (HDT) | 75℃ | Note: This value indicates heat resistance under specific test conditions and does not represent the maximum service temperature in actual use. It primarily reflects the material's balance between rigidity and heat resistance. |
Note: The HDT of RJ768MO shown above is 75℃, which is data under a specific test standard. For IML cold drink cups in practical applications, specialized grades with higher HDT would be more suitable for frequent contact with hot beverages. The specific choice should be based on the product's actual use scenarios and design requirements.
3. Summary: How to Choose PP Material for Your Cold Drink Cups?
When selecting PP material, it is recommended to follow this three-step decision logic:
- Define the use scenario: Will the cup primarily hold cold drinks, room-temperature beverages, or both cold and hot?
- Match material performance:
- Pure cold drinks → General-purpose PP is sufficient.
- Cold and hot universal → Must choose high-heat-resistant PP.
- Pursuing ultimate appearance and production efficiency → Prioritize IML thin-wall specialized PP (such as RJ768MO).
- Focus on key indicators: Pay attention to the material's impact resistance (especially at low temperatures), flowability (related to molding efficiency), and sensory properties (ensuring safety and odorlessness).
With the right material choice, the cold drink cup can achieve both "beauty and brawn" – possessing the high aesthetics of IML while delivering reliable performance.
4. FAQ
Q1: Are all PP materials suitable for IML cold drink cups?
Not necessarily. While PP is the mainstream material for IML cold drink cups, for optimal bonding and production efficiency, it is recommended to prioritize thin-wall injection grade PP specifically designed for the IML process. They offer better flowability, dimensional stability, and appearance.
Q2: Can PP cold drink cups be used in the microwave?
It depends on the specific PP material grade. Ordinary PP cups may not withstand high temperatures. If microwave heating is required, be sure to choose PP material clearly labeled "microwave-safe" or high-heat-resistant, with an HDT typically reaching 135-140℃ or higher. Always check the product instructions before use.
Q3: How can PP cold drink cups be ensured not to break easily in low-temperature environments (such as freezers)?
Choose PP materials with excellent impact resistance. For example, materials like Borouge RJ768MO offer outstanding drop impact resistance even under low-temperature refrigerated conditions, effectively reducing the risk of breakage.
Q4: Will the IML label on PP cold drink cups peel off?
One of the major advantages of the IML process is that the label is integrated with the cup body and is not prone to peeling. However, to achieve the best results, in addition to the process itself, the material should also have characteristics such as low shrinkage and low warpage to ensure smooth label application.
Q5: Is PP material safe? Does it release harmful substances?
Food-grade PP material is safe. It contains no harmful chemicals, is odorless, and complies with food contact safety standards such as FDA or EU regulations, making it suitable for food and beverage packaging.