Location:
Recyclable Plastic Tables and Chairs with IML Labels – Why Doesn't It Affect Recycling and Reprocessing?
Tech & News

Recyclable Plastic Tables and Chairs with IML Labels – Why Doesn't It Affect Recycling and Reprocessing?

Recyclable Plastic Tables and Chairs with IML Labels – Why Doesn't It Affect Recycling and Reprocessing?

If you are looking for an eco-friendly labeling solution for your outdoor plastic tables and chairs, you will inevitably face a core question: When an IML in-mold label is applied to table legs, does it need to be removed during recycling? If not, will it affect recycling and reprocessing?

The answer is: No removal is needed. The entire table or chair can be directly shredded and recycled. IML labels not only do not affect recycling and reprocessing – they actually make the recycling process simpler and more efficient.

📖 Table of Contents

1. The Core Logic of IML: Labels Are "Grown In," Not "Stuck On"

Furniture-2.jpg

To understand why IML labels do not affect recycling, you first need to understand the fundamental difference between IML and traditional pressure-sensitive labels.

Pressure-sensitive labels are "stuck on" – the label has adhesive on the back and relies on adhesive force to attach to the plastic table or chair surface. During recycling, the label must first be peeled off, and residual adhesive must be removed before the material can be shredded and reprocessed.

IML in-mold labels are completely different. IML uses pre-printed polypropylene (PP) labels to achieve decorative effects: the pre-printed PP label is inserted into the mold, then molten PP is injected, and the label fuses together with the part. The label is not "stuck on" – it is fused with the table or chair.

This fundamental difference determines the completely different approach to recycling.

2. Same Material PP: The "Passport" for Recycling

Another key feature of IML labels is that the label and the table/chair use the same material.

The vast majority of IML outdoor tables and chairs use polypropylene (PP) for both the label and the main body. The label and the furniture are both PP, with identical chemical composition, forming a mono-material (polypropylene) structure that is fully recyclable.

What does this mean? When the plastic table or chair reaches the end of its useful life and enters the recycling stream, the entire piece of furniture can be directly fed into a shredder – label and body together – with no separation process required.

The recycled PP flakes are then melted and repelletized for use in manufacturing new plastic products. The entire process requires no label peeling, no adhesive removal, and no additional separation steps.

In one sentence: Recycling an IML table or chair means throwing the whole piece into the shredder, rather than "skinning" it first and then recycling.

3. Industry Recognition: What Do Global Authorities Say?

The recycling advantages of IML labels have been recognized by multiple global authoritative organizations.

The Association of Plastic Recyclers (APR) has recognized IML as the "preferred" labeling method for polypropylene (PP) and high-density polyethylene (HDPE) when using compatible polymer labels, because the label is fused with the package/part wall. APR specifically notes that "the absence of adhesive is beneficial for recycling because it does not affect color or other mechanical properties."

RecyClass (a European authoritative certification body for plastic recycling) has designated IML as a decoration technology "fully compatible with colored PP recycling" – provided that the total ink volume does not exceed 1% of the total package weight. This condition is easily met for standard outdoor furniture products. RecyClass testing also shows that recycled plastic from IML can be reused in injection molding applications at concentrations up to 50%.

IML achieves true "mono-material" structure – both the furniture and the label are PP, with no adhesive and no contamination from other materials. This mono-material structure maintains the highest purity and value in the recycling stream.

4. Recycling Comparison: IML vs. Pressure-Sensitive Labels

For a more intuitive comparison, here is a side-by-side look:

Comparison DimensionIML In-Mold LabelTraditional Pressure-Sensitive Label
Label-furniture relationshipFused during injection moldingAdhered to the surface with adhesive
Label removal required before recycling?NoYes, label must be peeled off first
Adhesive removal required?No (no adhesive)Yes, residual adhesive must be removed
Recycling processDirect whole-piece shreddingPeeling → adhesive removal → shredding
Recycling efficiencyHighLow
Recycling costLowHigh
Recycled material purityHigh (mono-PP)May be contaminated by adhesive

Pressure-sensitive labels, due to adhesive contamination, leave particles and residues that reduce the quality grade of the final recycled material. Residual adhesive, ink, and label fragments contaminate the recycled material, preventing closed-loop recycling at the same quality level. IML labels, being the same material as the furniture, with no adhesive, and directly shreddable as a whole – eliminate the cumbersome steps of label peeling and adhesive removal, resulting in higher recycling efficiency and recycled material purity.

5. FAQ

Does the IML label on plastic tables and chairs need to be removed during recycling?
No. The IML label fuses with the furniture during injection molding – both are the same material (PP). The entire piece can be directly shredded and recycled without removing the label.
Does the IML label affect the purity of recycled material?
No. The IML label and the furniture use the same PP material. After shredding, the resulting PP flakes are of uniform composition. As long as the ink volume is within a reasonable range (typically far below 1% of total weight), there is no negative impact on recycled material quality.
Why can't pressure-sensitive labeled furniture be directly recycled as a whole?
Pressure-sensitive labels have adhesive on the back. During recycling, the label must first be peeled off and residual adhesive removed; otherwise, the adhesive contaminates the recycled material. This process is inefficient and costly.
Which is more environmentally friendly: IML-labeled furniture or traditionally labeled furniture?
IML is more environmentally friendly. IML uses same-material PP labels, no adhesive, and enables direct whole-piece recycling. Traditional labeling requires additional label-peeling and adhesive-removal steps, and residual adhesive may contaminate the recycled material.
What can recycled IML tables and chairs be used for?
The recycled PP flakes are melted and repelletized for use in manufacturing new plastic products. Independent testing shows that recycled plastic from IML can be reused in injection molding applications at concentrations up to 50%.
Does ink affect IML recyclability?
Within reasonable limits, no. RecyClass testing shows that as long as the total ink volume does not exceed 1% of the total package weight, IML is fully compatible with colored PP recycling. The ink proportion on outdoor furniture labels is typically far below this standard.
Does IML really have no adhesive?
Yes. IML labels fuse directly with molten PP during injection molding – no adhesive is required. This is one of the core reasons IML is more environmentally friendly than pressure-sensitive labels.

Contact Us

  • Name*

  • Telephone*

  • Region*

  • Please fill in your request*

电话咨询:020-000000
QQ咨询:177488228
微信客服
扫码咨询