Location:
Solventless Lamination Process in the Production of In-Mould Labels
Tech & News

Solventless Lamination Process in the Production of In-Mould Labels

Solventless Lamination Process in the Production of In-Mould Labels

NEW-149.jpg

In the multi‑layer lamination technology system for in‑mould labels (IML), dry lamination was once the mainstream process for bonding heterogeneous materials, but the VOC emissions from its solvent‑based adhesives have become increasingly restricted by environmental regulations. As an environmentally friendly upgrade to dry lamination, solventless lamination (also known as solvent‑free lamination) has emerged. This process uses 100% solids adhesives, which are applied and immediately pressed together without the need for oven drying, achieving zero VOC emissions, low energy consumption, and high productivity. This article systematically introduces the solventless lamination process, covering its principles, key control parameters, typical applications in IML, advantages and disadvantages, and development trends.

1. Basic Principle and Process Flow of Solventless Lamination

1.1 Principle

The core of solventless lamination is the use of liquid adhesives containing no organic solvents. The most common type is two‑component polyurethane (PU) adhesive, consisting of a polyol component (Part A) and an isocyanate component (Part B). The two components are mixed online at a certain ratio (typically 100:50 to 100:75) before coating, then applied to the substrate surface. At room temperature or under mild heating, Parts A and B undergo a chemical reaction (crosslinking curing), forming a strong adhesive layer. Since no solvent evaporates, all solid components of the adhesive remain in the glue line; therefore, although the coating weight per unit area is lower than that of solvent‑based systems, the dry film thickness is sufficient.

1.2 Typical Process Flow

A solventless lamination line typically consists of the following units: first substrate unwind → solventless coating unit (mixing and coating) → laminating unit → wind (with optional in‑line or off‑line curing). The detailed steps are:

  • Mixing and coating: Parts A and B are delivered by precision metering pumps to a static mixer before the coating head, where they are mixed uniformly. The mixture is then applied evenly onto the first substrate using a five‑roll solventless coating head or a three‑roll coating head. Coating weight is typically controlled at 0.8–2.5 g/m² (only one‑third to one‑half that of solvent‑based systems).

  • Lamination: The coated first substrate immediately meets the second substrate at the laminating nip and is bonded under pressure. Because there is no drying section, the lamination process is extremely short (less than one second from coating to pressing).

  • Curing: The wound laminate is placed in a curing oven (30–50°C, controlled humidity) for 24–48 hours to allow full crosslinking of the adhesive, achieving final peel strength. Some new adhesives offer “instant strength,” eliminating the need for curing before subsequent processing.

1.3 Key Equipment Features

  • Solventless coating head: A closed five‑roll or three‑roll system that precisely controls coating weight and prevents the adhesive from absorbing moisture from the air.

  • Mixing system: Equipped with high‑precision metering pumps (gear pumps or piston pumps) with flow control accuracy of ±1%, ensuring a constant mix ratio.

  • Laminating unit: The heated nip roll temperature is adjustable (30–60°C) to accelerate the initial reaction and improve initial tack.

2. Process Characteristics and Key Parameters

2.1 Core Advantages

  • Zero VOC emissions: Completely free of organic solvents, no drying tunnel required, no exhaust gas treatment cost – meets the strictest environmental standards.

  • Low energy consumption: No need to heat large volumes of air to evaporate solvents; energy consumption is only 20–30% of solvent‑based dry lamination.

  • High productivity: Lamination speeds can reach 300–400 m/min (or even higher), far exceeding solvent‑based dry lamination (typically 150–250 m/min).

  • Adhesive saving: Coating weight is only 30–50% of solvent‑based systems (on a dry basis), significantly reducing adhesive usage.

  • Safe and hygienic: No solvent residue, no fire or explosion risk – suitable for food and pharmaceutical packaging.

2.2 Key Process Parameters

ParameterTypical RangeImpact
Mix ratio100:50–100:75 (A:B)Deviation leads to incomplete curing or tacky adhesive layer
Coating weight0.8–2.5 g/m²Too low: insufficient strength; too high: increased cost, possible strike‑through
Lamination speed150–400 m/minAffects initial tack and pot life management
Lamination roll temperature30–60°CAccelerates reaction, improves initial bond
Curing temperature30–50°CDetermines curing speed and final strength
Curing time24–48 hoursAdjustable based on adhesive type and temperature

2.3 Pot Life and Operating Window

After mixing, the viscosity of solventless adhesive gradually increases over time until it can no longer be applied. This period is called the “pot life,” typically 20–60 minutes. Production must match coating speed with the amount of mixed adhesive to prevent gelling in the coating pan.

3. Application of Solventless Lamination in IML

In the IML field, solventless lamination is mainly used in the following scenarios:

3.1 High‑End Food IML Labels

For packaging that comes into direct contact with food or sensitive food products (e.g., yogurt cups, ice cream tub labels), any solvent residue poses a migration risk. Solventless lamination completely avoids solvent residues such as ethyl acetate and toluene, complying with food contact material regulations such as GB 9685 and EU 10/2011. For example, when producing IML labels with the structure “printed PET film / solventless adhesive / PE heat‑seal layer,” solventless lamination ensures the label is safe and reliable under hot‑fill or refrigerated conditions.

3.2 Pharmaceutical IML Labels

Pharmaceutical packaging is extremely sensitive to solvent residues. Solventless lamination meets the stringent hygiene requirements of medicinal packaging, preventing organic solvents from migrating into the drug. Typical applications include the lamination of PET facestock, aluminium foil barrier layer, and PE heat‑seal layer (e.g., IML labels on the bottom of blister packs).

3.3 Solvent‑Sensitive Film Materials

Certain high‑performance films (e.g., fluoropolymer films, PVDC‑coated films) may be swollen or corroded by organic solvents. Solventless lamination uses 100% reactive adhesives with no solvent attack, making it suitable for such special substrates.

3.4 PE/PE Homogeneous Lamination (Recyclable Design)

In the manufacture of all‑PE IML labels, two layers of PE film need to be laminated together. Solventless lamination uses polyurethane adhesive, which – unlike direct heat fusion co‑extrusion – still provides adequate peel strength. With a very low coating weight (approx. 1–2 g/m²), its impact on the quality of recycled material is minimal. This is one of the viable options for achieving “all‑PE mono‑material IML labels.”

4. Advantages and Disadvantages Analysis

4.1 Advantages

AdvantageDescription
Environmentally friendlyZero VOC emissions, no exhaust treatment needed – complies with clean production requirements
Low energy consumptionNo drying tunnel; electricity and heat consumption greatly reduced
High speed300–400 m/min, increasing productivity
No solvent residueSafe and hygienic – suitable for food/pharmaceutical packaging
Adhesive savingCoating weight only 1/2 to 1/3 of solvent‑based systems
Small equipment footprintNo long drying tunnel; line length reduced by about one‑third

4.2 Disadvantages

DisadvantageDescription
High initial equipment investmentSolventless coating head and precision mixing system are expensive
Slightly higher adhesive costSolventless PU adhesive unit price is generally higher than solvent‑based (but lower coating weight means total cost may be close or slightly lower)
High process control requirementsMix ratio, temperature, and pot life must be precisely controlled
Sensitivity to substrate wettabilityFor very low surface energy materials (e.g., PTFE, untreated PE), corona treatment or primer may be required
Low initial tackImmediately after lamination, bond strength is low; careful handling is needed to avoid shifting

5. Comparison of Solventless Lamination, Dry Lamination, and Extrusion Lamination

ProcessAdhesive/MediumEnvironmental FriendlinessSpeedCoating Weight (dry)Equipment InvestmentBond StrengthMain Applications
Solventless lamination100% solids 2K PUExcellent (zero VOC)300–400 m/min0.8–2.5 g/m²Medium‑highHighFood/pharmaceutical IML, heterogeneous materials
Solvent‑based dry laminationSolvent‑based PU (ethyl acetate, etc.)Poor (VOCs)150–250 m/min2–5 g/m²MediumVery highGeneral purpose, but under environmental pressure
Extrusion laminationMolten resin (LDPE/EVA)Excellent (solvent‑free)50–250 m/min10–50 μm (approx. 10–50 g/m²)Medium‑highMediumCurtain coating, paper/plastic lamination

In IML production, solventless lamination is gradually replacing solvent‑based dry lamination, especially in high‑end food and pharmaceutical packaging. Compared to extrusion lamination, solventless lamination provides a thinner, more uniform adhesive layer and is better suited for bonding PET, aluminium foil, etc. to PE, while extrusion lamination excels at thick coating (e.g., curtain coating).

6. Future Development Trends

  1. Driven by environmental regulations: Global VOC emission limits are becoming increasingly stringent (e.g., China’s Air Pollution Prevention and Control Law, EU Solvent Emissions Directive). Solventless lamination will become the mainstream direction for IML lamination processes.

  2. Development of fast‑curing adhesives: Research into solventless adhesives that achieve “instant curing” or “short curing (<6 hours)” will improve production responsiveness.

  3. Low‑temperature curing types: Designed for heat‑sensitive substrates (e.g., unstretched PE, low‑melting films) to reduce lamination temperature.

  4. Bio‑based solventless adhesives: Use renewable raw materials (e.g., soybean oil, castor oil) to produce polyurethane, reducing dependence on fossil resources.

  5. Digital closed‑loop control: In‑line viscosity monitoring, automatic ratio adjustment, and AI‑based process optimisation will further improve lamination quality stability.

7. Conclusion

The solventless lamination process, with its outstanding advantages of zero VOC emissions, low energy consumption, high speed, and no solvent residue, has become an important direction for environmentally friendly upgrading in IML production. It solves the environmental and safety pain points of traditional solvent‑based dry lamination while meeting the strict requirements for solvent residues in high‑end food and pharmaceutical packaging. Although initial equipment investment and adhesive cost are slightly higher, the overall operating cost (considering energy, environmental facilities, solvent recovery, and production efficiency) is often more competitive.

For IML label converters, transitioning to solventless lamination is not only a passive response to environmental regulations but also a forward‑looking strategy to enhance product competitiveness and expand into high‑end markets. With advances in materials science and automation technology, solventless lamination will occupy an increasingly important position in the future IML industry.


Contact Us

  • Name*

  • Telephone*

  • Region*

  • Please fill in your request*

电话咨询:020-000000
QQ咨询:177488228
微信客服
扫码咨询