Location:
IML In‑Mold Label Butter Containers Label Integrally Molded with Container Wall – Never Curls, Never Falls Off
IML In‑Mold Label Butter Containers Label Integrally Molded with Container Wall – Never Curls, Never Falls Off
IML In‑Mold Label Butter Containers Label Integrally Molded with Container Wall – Never Curls, Never Falls Off
Detail

Motek presents IML in‑mold label butter containers. Using advanced in‑mold labeling technology, the printed label is permanently fused with the container wall during the injection molding process. No adhesive, no gap, no interface – the label becomes part of the wall. Say goodbye to the common problems of traditional adhesive labels – edge curling and label detachment – caused by refrigeration, moisture, and handling. Ideal for butter, margarine, spreads, and other dairy products. Provides a durable, clean, and premium brand presentation.


Key Product Advantages

▪ 1. Integrally Molded – Label & Wall Fused Without Interface

  • IML label is molded together with molten PP inside the injection mold

  • Label edges completely encapsulated by plastic – no separation interface

  • No adhesive, no bubbles, no gaps – truly seamless

▪ 2. Never Curls – Permanently Solves Traditional Label Issues

  • Adhesive labels curl at low temperatures due to differential shrinkage

  • IML label and container are same material (PP) – identical shrinkage – never curls

  • Tested at -20°C in humid conditions – edges remain flat

▪ 3. Never Falls Off – Physical Fusion, No Aging Failure

  • No chemical adhesive – no risk of adhesive aging or losing tack

  • Bond strength between label and wall approaches the material's own strength

  • Withstands vigorous wiping, washing, repeated freezing – label stays attached

▪ 4. Food‑Grade PP Material – Safe & Reliable

  • Virgin food‑grade polypropylene, certified to FDA and EU 10/2011

  • BPA‑free, phthalate‑free – direct contact with butter and dairy

  • Grease‑resistant, refrigeration‑resistant (-20°C) – no odor absorption

▪ 5. High‑Definition Printing – Brand Stays Like New

  • Multi‑color IML printing – saturated colors, sharp details

  • Label surface protected by PP layer – scratch‑resistant, washable

  • Print brand logos, nutrition facts, barcodes, usage instructions


Technical Specifications (Typical)

ParameterSpecification
Capacity range50 ml – 500 ml (common: 125g, 250g, 500g butter)
Container shapeRound / Square / Oval (customizable)
Container materialFood‑grade polypropylene (PP)
Label materialSpecial PP film (same material)
Bonding methodInjection molded together – no adhesive, no interface
Curl resistance-20°C for 30 days – no edge curling
Detachment resistanceSurvives vigorous wiping, washing, freeze‑thaw cycles
Operating temperature-20°C ~ 60°C
Optional lidsPP flip lid, easy‑peel film, aluminum foil seal, tamper‑evident
Minimum order quantity10,000 pcs (trial orders negotiable)

Motek IML Butter Container vs. Traditional Adhesive Label Container

FeatureTraditional Adhesive LabelMotek IML Integrally Molded
Edge curlingCommon (refrigeration, moisture)Never curls (edges encapsulated)
Label detachmentAdhesive ages – may fall offNever falls off (physical fusion)
WashabilityLabel can soak, liftWashable – label stays intact
Scratch resistanceSoft surface easily damagedPP protective layer – scratch‑resistant
RecyclabilityNeed label separation (difficult)Same material – direct recycle
Shelf appearancePossible bubbles, glue marksSmooth, seamless, premium

Application Scenarios

➤ Supermarket refrigerated cases – No edge curling under long‑term refrigeration – brand image preserved
➤ Butter wholesale & distribution – Stacking and transport – no label curling from pressure
➤ Household refrigerators – Repeated opening, condensation – label stays attached
➤ Bakeries – Large butter tubs, frequent scooping – label resists wear
➤ Exported dairy products – Withstands humidity & temperature changes during sea freight – no label detachment


Customization Services (Motek One‑Stop Support)

Customization itemOptions available
Container shapeRound, square, oval; private mold available
Capacity50 ml – 500 ml – custom design
Label printing1–8 colors, CMYK + spot colors; full or partial circumference
Surface finishMatt, glossy, spot UV
Lid typePP flip lid, easy‑peel film, aluminum foil, tamper‑evident
Minimum order quantity10,000 pcs (trial from 3,000 pcs negotiable)

About Motek

Motek is a professional manufacturer of IML in‑mold label packaging, with over 12 years of injection molding and in‑mold labeling experience. We specialize in “zero‑interface” IML technology, ensuring permanent fusion between label and container. Our factory is ISO 9001, BRC, and FSSC 22000 certified. We have supplied never‑curl, never‑fall‑off IML packaging solutions to numerous butter and dairy brands globally.

Quality commitment: Every batch undergoes -20°C curl testing and destructive label adhesion testing. If any curling or detachment is found, we offer full replacement or refund.


FAQ

Q: Under what conditions do “never curls, never falls off” apply?
A: Normal use conditions (-20°C to 60°C, regular handling, washing, refrigeration). Extreme destructive actions (e.g., intentionally cutting the interface with a knife) are not considered normal use.

Q: Is the cost difference between IML and adhesive labels significant?
A: Initial mold cost is slightly higher, but you save on manual labeling, label inventory, rework, and brand image loss from curling. At medium to high volumes, total cost is comparable or lower than traditional methods.

Q: Can the container body be custom colored?
A: The natural PP color is milky white or translucent. Color is mainly achieved through the IML label. If you require colored container body, color masterbatch can be added, but MOQ will be higher.

Q: Does IML support QR codes or variable data?
A: Yes. Variable QR codes, batch numbers, expiration dates can be printed for traceability or marketing campaigns.

Q: Can you accept an MOQ of 5,000 pieces?
A: Negotiable. For first‑time customers, we support trial runs of 5,000 pieces (unit price slightly higher).


Integrally molded, never curls – Motek IML butter containers make the label “grow” on the container.

IML In‑Mold Label Butter Containers Label Integrally Molded with Container Wall – Never Curls, Never Falls Off

Facebook
X
LinkedIn
Pinterest
Whatsapp
Line
Tumblr
$1.00
Parameter
Process Type : In-Mold Labeling
Applicable Molding Process : Injection
Application Areas : Cabinet Furniture
Substrate Material : PVC BOPP、PE、PET、PP Paper
Label Thickness : Fully customized Typically 50–60 μm, range 15–110 μm
Size / Shape : Fully customized, die‑cut to customer’s drawing
Surface Finish : Glossy
Applicable Materials : PP, PC, ABS, PC+ABS, etc.
Adhesion Requirement : Must be compatible with container material → fuses perfectly
Printing Process : Gravure
Available Textures : Custom patterns
Up to 10 colours : Up to 10 colours
Colour Standard : Pantone / CMYK
Special Effects : Fully customized, Cold foil (gold/silver), colour‑shift, scented ink, spot varnish, etc.
Reservation Now
Email Us Now
电话咨询:020-000000
QQ咨询:177488228
微信客服
扫码咨询