
The most frustrating problem with traditional cookie jars: after a few months, the paint starts to peel off in patches, and the sticker label lifts at the edges or falls off completely – not only ugly but also leaving debris near food. Motek introduces the Round IML In‑Mold Label Cookie Jar, ending the embarrassment of “peeling paint & falling label” once and for all. We use IML (In‑Mold Labeling) technology to its fullest, fusing the label and the jar body together in a single injection molding process – they become one inseparable whole.
How does IML make the label and jar body become one?
Traditional printing or labeling methods only attach the label to the surface (adhesive or ink adsorption) – two separate layers. When temperature, humidity, or friction occurs, they gradually separate – that’s the root cause of peeling and falling.
With Motek IML, a pre‑printed film is placed inside the injection mold. After molten plastic is injected, the high temperature and pressure bond the back of the film to the plastic at a molecular level. After cooling, you cannot find any boundary between the label and the jar body – they are a single homogeneous material. Try to scratch the edge with your fingernail? There is no gap to lift. Wash with hot water? No bubbling. Scrub with a brush? The pattern remains intact.
Three proofs of “becoming one”:
No boundary: The label edge is completely encapsulated by plastic – no seams, no raised edges. Your finger feels a smooth continuous surface.
No possibility of falling off: No adhesive layer, no ink adsorption layer – physically nothing can separate.
No paint peeling: The pattern is encapsulated beneath the plastic surface – there is no “paint layer” to begin with. So naturally, no paint can peel.
Optimized for round cookie jars:
Curved surfaces are the biggest challenge for traditional labels – the greater the curvature, the stronger the edge stress, and the more likely lifting occurs. Motek, through precision curved mold design and high‑flexibility film, achieves a 360° seamless fusion between label and jar body. No matter which angle you look from, you cannot see where the label starts or ends – as if the pattern grew naturally from inside the plastic.
More practical advantages:
Food‑grade safe: Made of food‑grade PP plastic + eco‑friendly inks – odorless, BPA‑free – safe for direct contact with cookies, candies.
Scratch‑resistant: Surface hardness 2H+ – metal spoons, fingernails leave no marks.
Water & oil resistant: Wipes clean easily – fingerprints, grease do not penetrate.
Airtight & fresh‑keeping: Equipped with silicone seal ring + snap lid – effectively moisture‑proof, keeps cookies crisp.
Customizable designs: Supports brand logos, cartoons, holiday themes – the integrated pattern never fades, ideal for promotional gifts or gift jars.
Smooth & safe: Rounded edges on jar and lid – no burrs, safe to handle.
Why choose Motek?
Motek specializes in IML one‑piece molding technology, from mold development to injection production. Every batch of round cookie jars undergoes peel testing (impossible to peel), thermal cycle testing (-20°C to 60°C, no interface change), and oil resistance testing (immersion in cooking oil – no abnormality). We believe: a truly excellent cookie jar should let users forget about “label falling” and focus only on the good taste.
Applicable scenarios:
Home kitchen: Store cookies, biscuits, candy – frequent opening and washing, label stays perfect.
Kids’ room: Store snacks – no worry about children picking or biting at edges (there are no edges to pick).
Café / bakery: Counter display for homemade cookies – integrated label enhances brand quality and lasts long.
Holiday gifts: Custom‑patterned IML cookie jar – itself a refined gift that can be used for years.
One sentence summary:
Motek round IML cookie jar, with label and jar body fused as one, says goodbye to paint peeling & label falling forever. Food‑grade safe, airtight, scratch‑resistant – the pattern stays with you through many moments, never betraying. One piece, never apart.