Location:
Analysis of Low-Temperature Resistance Technology for IML Labels on Yogurt Cups in Cold Chain Storage Environments
Tech & News

Analysis of Low-Temperature Resistance Technology for IML Labels on Yogurt Cups in Cold Chain Storage Environments

High-Temperature Sterilization Yogurt Cup – Technical Requirements for Heat-Resistant IML Labels

Before yogurt cups reach the market, they must endure a "high-temperature trial" – pasteurization or hot-fill processing. Ordinary pressure-sensitive labels tend to blister, peel, and fade under high heat, while IML (In-Mold Labeling) labels, which fuse with the cup body during injection molding, have inherent heat-resistant advantages. However, to truly meet the requirements of yogurt high-temperature sterilization processes, IML labels face a series of stringent technical thresholds in materials, inks, and processing.

📖 Table of Contents

1. Why Must Yogurt Cups Undergo High-Temperature Sterilization?

yogurt-7.jpg

Yogurt is a high-protein, high-moisture dairy product that is highly susceptible to microbial growth during production, filling, storage, and transport. To extend shelf life and ensure food safety, yogurt typically undergoes pasteurization or high-temperature sterilization after filling.

Common yogurt sterilization processes include:

Sterilization ProcessTemperature RangeDurationApplication
Pasteurization72-75°C15-30 secondsChilled yogurt, short-shelf-life products
Hot filling85-95°CSeveral minutesAmbient yogurt, long-shelf-life products
Retort sterilization110-135°C15-30 minutesExtended-shelf-life yogurt

For yogurt cups made from PP (polypropylene) material, these high-temperature processes are feasible – PP's temperature resistance ranges from -20°C to 120°C and even 121°C. However, the question remains: can the label on the cup withstand it?

2. What Requirements Does High-Temperature Sterilization Place on Yogurt Cup Labels?

Under high-temperature sterilization conditions, labels must withstand not just "gentle heating" but a triple challenge of high temperature, high pressure, and high humidity. Specifically, heat-resistant IML labels must meet the following requirements:

2.1 No Blistering

If there are bubbles or delamination between the label and the cup body, they will expand under heat and form raised bubble-like defects on the label surface. Qualified heat-resistant IML labels must remain flat and bubble-free at sterilization temperatures.

2.2 No Fading

Ordinary inks undergo molecular migration or decomposition at high temperatures, causing colors to darken, lighten, or even disappear completely. Heat-resistant IML labels require specialty inks with excellent thermal stability to ensure colors remain unchanged throughout the sterilization process.

2.3 No Delamination/Peeling

The bonding strength between the IML label and the cup body must not decrease at high temperatures. If the coefficients of thermal expansion of the label material, ink, or adhesive layer do not match the PP substrate, delamination or peeling can occur under heat.

2.4 No Deformation

The label's film substrate must not shrink, curl, or warp at high temperatures, and must remain smoothly adhered to the cup body.

2.5 Food Safety

All label materials (film, ink, adhesive layer) must not release harmful substances at high temperatures and must comply with food contact material regulations.

3. Three Technical Pillars of Heat-Resistant IML Labels

3.1 Substrate: PP Film Is the Foundation

The cup body material is typically food-grade PP (polypropylene). The film substrate for heat-resistant IML labels must also be PP material, matching the cup body.

Why must PP be used?

  • Same-material fusion: PP labels and PP cup bodies fuse as one during injection molding, providing the strongest bond
  • Matching shrinkage: During cooling, the same material has identical thermal shrinkage rates, preventing stress-induced delamination
  • Temperature compatibility: PP's temperature range (-20°C to 120°C+) is highly compatible with yogurt sterilization processes

If other materials such as PE are used for the label film, even though IML achieves a degree of bonding, the risk of delamination at high temperatures increases significantly due to different coefficients of thermal expansion.

3.2 Ink: Heat-Resistant Ink Is Critical

Ordinary inks suffer from pigment migration, color darkening, and ink layer cracking at high temperatures. Heat-resistant IML labels must use specialty heat-stable inks, with key characteristics including:

  • Thermal stability: Maintains color integrity at 110-135°C
  • Adhesion: Remains firmly attached to the PP film at high temperatures
  • Non-migration: Ink components do not migrate into food at high temperatures

Some premium heat-resistant IML labels incorporate a special lacquer protective layer over the ink, creating a "thermal barrier" that further prevents heat damage to the ink.

3.3 Adhesive Layer: Activated by Heat, Stable at Heat

The back of the IML label has a hot-melt adhesive layer that is activated by the high temperature of injection molding, bonding the label to the molten PP cup body.

Heat-resistant IML labels have additional requirements for the adhesive layer:

  • Activation temperature matching: The adhesive must fully melt and distribute evenly at injection temperatures
  • High-temperature stability: The adhesive must not re-soften or degrade at sterilization temperatures
  • No bubbles: The adhesive layer must be uniform and void-free; otherwise, trapped air will expand into bubbles at high temperatures

4. Key Performance Indicators for Heat-Resistant IML Labels

Qualified heat-resistant yogurt cup IML labels must meet the following key performance indicators:

Performance IndicatorTechnical RequirementBasis
Temperature resistance-20°C to ≥120°C (up to 121°C for some)Upper limit of PP material
High-temperature appearanceNo bubbles, delamination, warping, or discolorationVisual inspection after sterilization
Color difference controlΔE≤2.0 before and after high-temperature exposureIndustry standard
AdhesionCross-hatch test ≥4B after high-temperature exposureTape pull test
Water resistanceNo blistering or peeling under high heat and humidityPost-sterilization inspection
Food safetyComplies with GB 4806 series and FDA 21 CFR requirementsFood contact material regulations

5. Heat-Resistant Control Points in Production Processes

5.1 Printing Process Control

Heat-resistant ink printing requires higher precision and stricter curing control:

  • Curing temperature and time: Inks must be fully cured; otherwise, residual solvents will vaporize and cause blistering during high-temperature sterilization
  • Ink layer thickness control: Excessive thickness leads to cracking; insufficient thickness results in poor opacity
  • Registration accuracy: Misregistration of multi-layer inks affects overall stability at high temperatures

5.2 Injection Molding Process Matching

The heat-resistant performance of IML labels depends not only on the label itself but also on the injection molding process:

  • Injection temperature: Must ensure the hot-melt adhesive on the label back is fully activated
  • Holding pressure: Ensures the label fully conforms to the cup body without trapped air
  • Cooling control: Uniform cooling prevents internal stress from uneven shrinkage

5.3 Sterilization Process Verification

Even if both the label and cup materials meet specifications, sterilization process verification must be conducted before mass production:

  • Simulate actual sterilization conditions (temperature, time, pressure) for full-cup sterilization testing
  • Inspect label appearance after sterilization (bubbles, discoloration, warping, delamination)
  • Conduct adhesion testing to confirm bonding strength has not decreased after high-temperature exposure

6. FAQ

Q1: What maximum sterilization temperature can IML yogurt cups withstand?
IML yogurt cups made from food-grade PP material typically withstand temperatures ranging from -20°C to 120°C. Some high-quality products can tolerate 121°C retort sterilization. For higher temperatures (such as 135°C UHT), specially formulated heat-resistant inks and label materials are required.
Q2: What is the difference between standard IML labels and heat-resistant IML labels?
Standard IML labels are primarily designed for ambient or refrigerated environments and are not specifically optimized for high-temperature sterilization. Heat-resistant IML labels use heat-stable inks, special lacquer protective layers, and high-temperature-stable adhesive layers to ensure no blistering, fading, or delamination at 110-135°C sterilization conditions.
Q3: Will IML labels fade after high-temperature sterilization?
Qualified heat-resistant IML labels use specialty inks with excellent thermal stability, maintaining color stability at 110-135°C sterilization temperatures. However, if ordinary inks are used, pigment migration and color darkening can indeed occur at high temperatures. Therefore, IML labels for high-temperature sterilized yogurt cups must use specialty heat-resistant inks.
Q4: Why are IML labels better suited for high-temperature sterilization than pressure-sensitive labels?
IML labels fuse with the cup body during injection molding, eliminating the "adhesive failure" problem. Pressure-sensitive labels rely on adhesives to attach to the surface – at high temperatures, adhesives soften and fail, causing blistering, shifting, or peeling. IML structurally avoids this problem.
Q5: How can the heat-resistant performance of IML labels be verified?
Sterilization testing must be conducted on complete yogurt cups (with labels) in a test environment that simulates actual sterilization conditions. After testing, check: ① appearance (no bubbles, discoloration, warping, or delamination); ② adhesion (cross-hatch test + tape pull); ③ color difference (ΔE≤2.0 before and after high-temperature exposure). It is recommended to work with an IML supplier that has testing capabilities to complete the verification.
Q6: Why is PP the preferred material for high-temperature sterilized yogurt cups?
PP (polypropylene) is one of the best-performing general-purpose plastics for high-temperature resistance in food packaging, with a temperature range of -20°C to 120°C+. Additionally, PP labels and PP cup bodies bond as the same material, providing the strongest adhesion and matching shrinkage rates, preventing delamination at high temperatures. Furthermore, PP does not release harmful substances at high temperatures, meeting food safety requirements.

Contact Us

  • Name*

  • Telephone*

  • Region*

  • Please fill in your request*

电话咨询:020-000000
QQ咨询:177488228
微信客服
扫码咨询