When you pick up a beautifully printed IML biscuit box, you see vibrant colors and feel a smooth surface. But few people know that behind this "talking" label lies a sophisticated material science system.
An in-mold label is not an ordinary printed film. It is a three-layer composite structure:
The choice of printing layer material – BOPP, PE, or PE+PP – directly determines the label's print quality, adhesion performance, durability, and ultimately the quality of the biscuit box.

The printing layer materials for in-mold labels fall into four main categories: BOPP, PE, PE+PP, and paper. Among these, film-based materials dominate the market – film-type labels account for approximately 80% of sales value and about 60% of consumption volume.
| Material Type | Key Characteristics | Main Advantages | Main Limitations |
|---|---|---|---|
| BOPP | Biaxially oriented, with special coating | Excellent printability | Different shrinkage rate from PE containers; may cause "orange peel effect" |
| PE | Non-oriented, requires corona treatment | Perfect match with PE containers | Poor printability; prone to deformation after hot stamping |
| PE+PP | Mono-oriented, requires corona treatment | Smooth surface, no deformation, excellent visual effect | Requires low-temperature foil for hot stamping |
| Paper | Traditional material, good printability | Low cost | Low-grade appearance; not suitable for premium products |
These four materials have different physical and chemical properties, and their application results vary significantly. Choose the right material, and your biscuit box looks "premium"; choose the wrong one, and even the best design will be wasted.
BOPP (Biaxially Oriented Polypropylene) offers the best printability among in-mold label materials.
BOPP undergoes biaxial stretching and has a special coating on its surface, enabling high-resolution, multi-color fine printing. The photo-quality biscuit images, delicate brand logos, and subtle color gradients on biscuit boxes – BOPP can reproduce them all perfectly.
At the same time, BOPP film has relatively high stiffness, making it suitable for converting and producing large-area labels.
BOPP's biggest problem lies in shrinkage rate mismatch.
If the biscuit box body is made of PE material, and the label uses BOPP (whose substrate is actually PP), their shrinkage rates differ. After injection molding and cooling, the label and the box body shrink at different rates, causing the label surface to develop fine wrinkles resembling orange peel.
"If the container material is PE and the in-mold label material is PP, because their shrinkage rates differ, the container surface often exhibits an 'orange peel effect' after label application."
The "orange peel effect" seriously affects the visual quality of the biscuit box, making an otherwise beautiful package look cheap and rough.
Conclusion: BOPP is suitable for applications with extremely high printing requirements and where the container material is also PP. If the biscuit box is PE, BOPP should be used with caution.
PE (Polyethylene) is another common in-mold label material.
PE's biggest advantage is material matching. If the biscuit box body is PE, PE labels have the same shrinkage rate as the container, ensuring no deformation issues after molding.
PE's shortcomings are equally evident:
Conclusion: PE is suitable for biscuit boxes where the container is PE and printing precision requirements are low. If high-quality printing is desired, PE is not an ideal choice.
PE+PP composite material offers the best overall performance among in-mold label materials.
PE+PP composite material combines the strengths of both materials:
PE+PP's biggest highlight is "smooth surface, no deformation, excellent visual effect". For biscuit boxes that need to "rely on appearance to sell" on the shelf, this is crucial.
Because PE+PP contains PE, it requires low-temperature hot stamping foil during the hot stamping process. The ideal hot stamping method is rotary hot stamping.
Conclusion: PE+PP is the preferred material for biscuit box IML labels – it offers good print quality while ensuring a smooth, non-deforming surface with the best visual effect.
Paper-based in-mold labels are mainly used in low-end consumer products.
5.1 Characteristics of Paper Labels
5.2 Limitations of Paper Labels
Paper labels have a lower-grade appearance and are not suitable for premium biscuit box packaging. Additionally, paper is less durable than film materials, performing poorly in moisture resistance, oil resistance, and abrasion resistance.
Conclusion: Paper is suitable for low-end, single-use biscuit packaging. For mid-to-high-end biscuit brands pursuing quality, paper is not recommended.
Selecting IML label material for biscuit boxes requires considering the following factors:
| Consideration | Recommended Material | Reason |
|---|---|---|
| Best print quality desired | BOPP (when container is PP) | Best printability, exquisite graphics |
| Container is PE | PE or PE+PP | Matching shrinkage rates, no deformation |
| Smooth surface, best visual effect | PE+PP (top choice) | Smooth surface, no deformation, excellent visual effect |
| Premium biscuit brands | PE+PP or BOPP (match container) | Premium appearance, enhanced brand image |
| Low-end, single-use packaging | Paper | Low cost, meets basic requirements |
For most mid-to-high-end biscuit boxes, PE+PP is the safest and highest-quality choice.